STRATOSENSE TETHER · IN DEVELOPMENT
The unit that rides
with the pilot
Tether connects to the remote controller. It carries the authorization state for the flight, acquires the telemetry the controller interface makes available, associates it with a known aircraft and operator, logs operational events and uploads them to the platform.
In development
Units built and bench-validated. Field validation in progress.
Ground side.
Always.
The Tether joins the operation where the pilot is. It takes what the supported controller or ground station makes available, binds it to a known aircraft and operator, and carries it onward — so the record of the flight has an origin that can be checked later.
It is never installed on or inside the aircraft.
What it does
Authorize
Carries the flight-specific authorization state, before the aircraft leaves the ground.
Acquire
Takes telemetry from the supported controller or ground-station interface.
Associate
Binds the session to a known aircraft, operator and remote pilot.
Log
Records operational events as the flight runs.
Upload
Carries telemetry, events and the current compliance state to the platform.
TETHER AND AUTHORIZATION
It carries the permission,
not just the telemetry.
Tether brings the authorization state down to the controller, validates it for the specific flight, and carries the telemetry back up to the same record.
Authorization / the permission artifact
Simulated- Flight ID
- SS-2291
- Aircraft
- UAS-014
- Operator
- OP-042
- Area
- Operation Zone A
- Altitude
- Authorized band
- Time window
- 14:30 – 15:00
- Status
- —
- Signature
- —
ACQUISITION, VISUALISED
Many protocols.
One record.
Whatever the source spoke, the record that reaches the platform has one schema, one time base and one device identity.
Acquisition / many protocols, one record
Simulated feedTelemetry / packet to dashboard
Simulated feed- Altitude
- —m AGL
- Ground speed
- —m/s
- Heading
- —deg
- Battery
- —%
- GNSS
- —
ACQUISITION
What Tether
can acquire.
Supported and target integration pathways. Availability depends on the aircraft, autopilot, remote controller and configuration in use. Not every pathway listed is commercially released, and none implies universal compatibility.
Autopilot / telemetry
Positioning / time
Physical / wireless interfaces
THE DATA BOUNDARY
It records what the
interface actually publishes.
Tether can record telemetry and event records that are made available to and received through its supported controller interface.
It does not access internal variables that a specific controller or flight stack does not publish. If the interface does not expose a value, that value is not in the record — and the record says so rather than inferring it.
Tether is not a flight-controller replacement, not an aircraft steering system, and does not autonomously fly the aircraft.
Talk to us about
your controllers.
Tether is in development. Tell us what you fly and we will tell you exactly where your configuration sits on the list above.